BONANZA X-90 - HIGH BOOST ENGINE / FLIGHT MODEL TUNE V2 This is a two-file update for the X-90 90 inHg / 35,000 ft / 400-gallon build. It is NOT a full aircraft or turbo logic installer. Requirements: - Existing Black Square Bonanza Professional installation with the X-90 90-inHg turbo XML patch already installed. - Compatible engines.cfg and flight_model.cfg (this patch replaces both). - Close MSFS 2020 before installing. Install (NO PYTHON): 1. Extract all ZIP contents to a folder, not the Windows ZIP preview. 2. Double-click INSTALL_X90_POWER_TUNE.cmd. 3. Select the package ROOT with layout.json and manifest.json. 4. Type INSTALL and press Enter. 5. Backups are created in X90_Backups under the selected folder. WHAT CHANGED: - power_scalar 2.90 -> 3.30 (approx 13.8% torque scaling increase; not a measured HP rating). - max_rated_hp 1000 -> 1500 nominal, primarily rated/consumption parameter; not itself an output power multiplier. - Higher fuel consumption and somewhat improved cooling assumptions. - Heavier 5,800 lb hypothetical structure and 2,550 lb empty weight. - More rudder area/authority at low speed, damped high-speed controls and stability. - Previous optimistic parasite drag reduction scaled back slightly. - 400-gallon fuel configuration and 90 inHg 35k targets preserved. - Existing PROPELLER and governor settings untouched. - Existing Black Square custom turbo XML NOT modified by this update. - Existing X90 boost gauge / cockpit model NOT modified by this update. IMPORTANT: Extremely fictional aircraft. No real Bonanza structure, engine, or piston propeller can be assumed safe/credible at Mach 0.9, 90 inHg and the high weight. Reference speed changes do not validate structural safety. Due to custom Black Square turbo and prop systems, delivered MAP, HP, and RPM MUST be checked in MSFS. Start at reduced throttle, then test progressively while monitoring governor/RPM, MAP, CHT, oil and fuel flow. If overspeed occurs, revert. Rollback: restore engines.cfg, flight_model.cfg, and layout.json from the new timestamped X90_Backups folder.