BONANZA X-90 - 45 inHg MANIFOLD PRESSURE - ENGINE ONLY ======================================================= This patch changes ONLY engines.cfg from the prior X-90 High-Boost Engine & Flight Model Tune. Design goal: 45 inHg manifold pressure (ABSOLUTE) at full throttle from sea level to 35,000 ft. - max_design_mp = 45.0 - critical_altitude = 35000 - 1,500 HP nominal, power_scalar 3.30, and the full propeller/governor block are untouched. - No gauges, panel files, cockpit models, flight_model.cfg, or pressurization content included. IMPORTANT: 'At all times' has been interpreted as maintaining up to 45 inHg at FULL THROTTLE through 35,000 feet, NOT fixing manifold pressure at idle or partial throttle. LIMITATION: Black Square's separate custom turbocharger behavior code lives in model.base/BonanzaProfessional_Base_INT.XML. This engine-only patch does NOT modify that file. If your earlier 35,000-foot turbo XML patch is not installed, 45 inHg at altitude may NOT be achievable, even when engines.cfg is set as requested. The stock Black Square gauge can also be limited by its own display range. Verify with an external SimVar reader if necessary. WINDOWS INSTALLATION (NO PYTHON) 1. Close MSFS 2020 and make a backup of your aircraft package. 2. Extract this ZIP to a folder. 3. Double-click INSTALL_X90_45INHG.cmd. 4. Choose the Black Square PACKAGE ROOT with layout.json and manifest.json. 5. Type INSTALL to confirm. Automatic backups are saved under X90_Backups. If you are currently running the old 90 inHg X-90 package but NOT the later 1,500 HP tune, this package will also install the later 1,500 HP engine configuration. It is built from that most recent supplied tune, not from your live simulator installation. UNTESTED: The installer and engine model have not been verified in the simulator. This is a fictional experimental configuration, not a real aircraft performance claim.