X-90 Piston
A heavily boosted A36TC experiment. The original turbo-normalized piston platform evolved through governor corrections, 45 inHg boost, a 1,500 HP target and 600 gallons of simulated avgas.
Two experimental aircraft. One legendary starting point. An evolving engineering journal of the piston-powered X-90 and the 1,500-SHP V5 X-90T turbine.
Browse the complete piston and turbine development logs, the engineering feasibility study, and first-person flight-test findings. Our project separates what has flown in MSFS from what is still only a proposal.
NEW / X-90T V5: 1,500-SHP target • approximately 2,000 prop RPM target • 300-gallon wing mains per side • clean-wing drag study. 516 KIAS is an unverified simulator envelope reference, not measured aircraft performance. See V5 specifications →
Both start with Black Square’s Bonanza Professional for Microsoft Flight Simulator. Neither represents a certified or physically validated real-world aircraft.
A heavily boosted A36TC experiment. The original turbo-normalized piston platform evolved through governor corrections, 45 inHg boost, a 1,500 HP target and 600 gallons of simulated avgas.
Born from the 500-SHP Black Square B36TP. The current V5 research configuration targets 1,500 SHP at approximately 2,000 prop RPM, plus 600 gallons of wing fuel. All changes await flight-test validation.
Real-world aircraft photographs are presented as visual references, not X-90 simulator captures. Image credits and permissions →
Separate tested observations from configuration targets. Simulator behavior does not establish real-aircraft feasibility.
Highest pilot-reported groundspeed at 35,000 ft with a 76-kt tailwind. Approximately 340 KTAS only if the wind was aligned with the flight path; IAS not recorded for this run.
Simulated avgas capacity after the fuel-system patch. CG and maximum mass require continued validation.
V1–V3 power target, not verified shaft output. The stock four-blade propeller remains a limiting factor.
Reported with severe governor and ITT problems. V5 lowers the power target and revises gearing, fuel delivery and wing drag; no successful V5 flight test has been reported.
Boosting horsepower is easy. Building a coherent simulator aircraft is difficult. The challenge is making engine torque, propeller aerodynamics, thermal protections, flight controls, and fuel systems behave as one machine.
We preserve the good results, document the ugly ones, and use evidence from each flight to decide what gets changed next.
Read the development FAQ →
What came from the commercial add-on, and what the experimental program has changed.
| ATTRIBUTE | BLACK SQUARE STARTING POINT | X-90 PISTON | X-90T TURBINE |
|---|---|---|---|
| Airframe | Bonanza Professional family | A36TC-based standalone clone | B36TP-based standalone clone |
| Engine | A36TC piston / B36TP PT6A-21 | High-boost piston | High-output turbine |
| Rated power | B36TP: 500 SHP | 1,500 HP nominal target | 1,500 SHP V5 configuration target |
| Fuel | B36TP: 124 gallons Jet-A | 600 gallons avgas (modded) | Stock tanks retained in V2 |
| Propeller status | Constant-speed unit | V3 governor working, cold-start delay reported | V5 governor / thrust / balance unverified |
| Verified outcome | Commercial baseline | 290 KIAS @ 15,000 ft reported | V1 worse-than-stock performance reported |
* Real aircraft performance and limits are different. X-90 results are anecdotal MSFS flight-test observations. Read limitations.